Akrapovic
Akrapovic Exhaust System for Audi RS 6 Avant / RS 7 Sportback / RS 6 Performance / RS 7 Performance (C8)
Your VIN (recommended)
Optional, but recommended for best fitment. We check your VIN against the part before your order ships.
Shipping: Extra-large part · $79 NSW & ACT, $119 VIC, QLD & SA, $199 WA, NT & TAS · one charge per order, shown at checkout · Shipping details
Pickup currently not available
Found it cheaper? We'll beat it. See the Crank Price Guarantee. Price in AUD including GST.
Fitment help: send us your car details and we will confirm the right part before you order. Ask us
Installation available in NSW and SA through our partner workshops. Book a fitting
Genuine, brand-new part, never a replica
Akrapovic's titanium Evolution Line for the Audi RS6 Avant and RS7 Sportback (C8, including Performance models) comes in two versions, one for cars with a petrol particulate filter (OPF/GPF) and one for cars without. Then choose a stainless link pipe set, or a downpipe and link pipe set with 200-cell cats, plus the optional sound kit.
The 4.0 V8 gets a deeper, louder voice that you can still quieten through the factory valves. Choose the version that matches your car's OPF.
Non-OPF/GPF version
Required: Exhaust System
Akrapovic Evolution Line (Titanium) for Audi RS 6 Avant / RS 7 Sportback / RS 6 Performance / RS 7 Performance / RS 6 GT (C8) - Non-OPF/GPF – S-AU/T/2H (Required)
The Evolution Line (Titanium) for the Audi RS 6 / RS 7 (C8) is made from lightweight, high-grade titanium, with one central and two side mufflers and a titanium collector. Stainless steel link pipes are larger in diameter than stock, with custom-made flex tubes fully insulated at the downpipes.
Key Features
- A valve on each side muffler controls gas flow and sound (housings cast in-house)
- The active X-connection, also cast in-house, has a valve controlling exhaust pulses from both sides of the engine
- Carbon fibre/titanium tailpipes, one each side, pair a handmade carbon fibre outer sleeve with a sandblasted, coated titanium inner
- Sound spans a low rumble, strong mid-range and high-frequency top end, with a sharp rumble on downshifts and no unwanted drone
- Dyno-tested against the stock Audi Sport system on an RS 6 Avant (C8): +15.7 hp (m) and +17.9 Nm at 6150 rpm, and over 20% lighter
- Optional Downpipe / Link pipe set (SS) and Akrapovic Sound Kit to control the valves; compatible with the original Audi trailer hitch
Specifications
- Material: Titanium
- Weight: 31.57 kg
- Installation time: 450 min
Note: The Link pipe set (SS) L-AU/SS/6 is mandatory with this system (S-AU/T/2H), which is split into two codes for packaging reasons.
Note: Developed for cars without petrol particulate filters.
Required - choose one: Link Pipe or Downpipes
Akrapovic Link Pipe Set (SS) for Audi RS 6 Avant / RS 7 Sportback / RS 6 Performance / RS 7 Performance / RS 6 GT (C8) - Non-OPF/GPF – L-AU/SS/6 (Required: choose one)
The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/T/2H. The system is split into two codes because of packaging requirements.
If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed.
Specifications
- Material: Stainless steel
Akrapovic Downpipe and Link Pipe Set (SS, 200 cpsi Cats) for Audi RS 6 Avant / RS 7 Sportback / RS 6 Performance / RS 7 Performance / RS 6 GT (C8) – DP/L-AU/SS/1 (Required: choose one)
Downpipe / Link pipe set (SS) was tested and developed together with Evolution Line (Titanium) system. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe sets L-AU/SS/6 or L-AU/SS/8/1 are not needed. When combined with the Evolution Line (Titanium) exhaust system the addition of the optional stainless steel Downpipe / Link pipe set (SS) will deliver a unique sound experience: from a low-down rumble to a strong mid-range V8 character and high frequency top end with the recognisable Akrapovic racing sound. The stainless steel downpipes, with sporty 200 cpsi catalytic converters, are insulated to prevent overheating the surrounding parts, and the stainless steel link pipes that have been developed to fit on Akrapovic downpipes feature custom made flex tubes and full insulation where they connect to the downpipes.
The fitting of this optional product will cancel ECE type approval for the Evolution Line (Titanium) exhaust system and remapping the ECU is mandatory.
This product does not meet emission compliance requirements for street or highway use.
Specifications
- Material: Stainless steel
- Weight: 18.4 kg
- Weight saving vs stock: 5.1 kg (21.7%)
- Installation time: 330 min
Optional: Sound Kit
Akrapovic Sound Kit (Exhaust Valve Remote) for Audi RS 6 Avant / RS 7 Sportback / RS 6 Performance / RS 7 Performance / RS 6 GT (C8) – P-HF1282 (Optional add-on)
The optional Akrapovic Sound Kit enables owners of selected Akrapovic car exhausts to control the sound of the system from the cockpit of their machine. Using Akrapovic technology, drivers can easily switch between the quiet mode and a sportier sound. With the use of a receiver (already included in evolution system) to drive the actuators that open or close the valves at the end of the exhaust system, drivers can use the Sound Remote Controller to regulate the valves.
With the use of the optional Akrapovic Sound Kit, the ECE type approval is no longer valid.
Specifications
- Installation time: 30 min
OPF/GPF version
Required: Exhaust System
Akrapovic Evolution Line (Titanium) for Audi RS 6 Avant / RS 7 Sportback / RS 6 Performance / RS 7 Performance / RS 6 GT (C8) - OPF/GPF – S-AU/T/1H (Required)
The Akrapovic Evolution Line (Titanium) for the Audi RS 6 Avant, RS 7 Sportback, RS 6 Performance, RS 7 Performance and RS 6 GT (C8) has one central and two side mufflers and a titanium collector. Stainless steel link pipes are larger than stock, with custom-made flex tubes fully insulated where they attach to the downpipes.
Key Features
- A valve on each side muffler; the valve housings and the active X-connection (with its own valve controlling exhaust pulses from both sides) are cast in the in-house foundry
- Carbon fibre/titanium tailpipes, one each side, with a handmade carbon outer sleeve and sandblasted, coated titanium inner
- Acoustically tuned from low rumble to a high-frequency top end, with a sharp rumble on downshifts and no unwanted drone
- Dyno-tested on an RS 6 Avant Performance (C8) against the stock Audi Sport system: +15.7 hp (m) and +17.9 Nm at 6150 rpm, with over 20% weight saving
- Compatible with the original Audi trailer hitch
- Optional Downpipe / Link pipe set (SS) and Akrapovic Sound Kit
Specifications
- Material: Titanium
- Homologation: ECE Type Approval
- Weight: 31.57 kg
- Installation time: 450 min
Note: The Link pipe set (SS) L-AU/SS/8/1 is mandatory with the Evolution Line (Titanium) S-AU/T/1H, which is split into two codes because of packaging requirements. If combined with the Downpipe / Link pipe set (SS), L-AU/SS/8/1 is not needed.
Note: ECE type approval is valid only for cars with an otto/petrol particulate filter. It is not valid when fitted with the Downpipe / Link pipe set (SS), which also makes ECU remapping mandatory, or with the Akrapovic Sound Kit.
Required - choose one: Link Pipe or Downpipes
Akrapovic Link Pipe Set (SS) for Audi RS 6 Avant / RS 7 Sportback / RS 6 Performance / RS 7 Performance / RS 6 GT (C8) - OPF/GPF – L-AU/SS/8/1 (Required: choose one)
The Link pipe set (SS) L-AU/SS/8/1 is a mandatory product to the Evolution Line (Titanium) S-AU/T/1H. The system is split into two codes because of packaging requirements.
If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/8/1 is not needed.
Specifications
- Material: Stainless steel
- Homologation: ECE Type Approval
Akrapovic Downpipe and Link Pipe Set (SS, 200 cpsi Cats) for Audi RS 6 Avant / RS 7 Sportback / RS 6 Performance / RS 7 Performance / RS 6 GT (C8) – DP/L-AU/SS/1 (Required: choose one)
Downpipe / Link pipe set (SS) was tested and developed together with Evolution Line (Titanium) system. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe sets L-AU/SS/6 or L-AU/SS/8/1 are not needed. When combined with the Evolution Line (Titanium) exhaust system the addition of the optional stainless steel Downpipe / Link pipe set (SS) will deliver a unique sound experience: from a low-down rumble to a strong mid-range V8 character and high frequency top end with the recognisable Akrapovic racing sound. The stainless steel downpipes, with sporty 200 cpsi catalytic converters, are insulated to prevent overheating the surrounding parts, and the stainless steel link pipes that have been developed to fit on Akrapovic downpipes feature custom made flex tubes and full insulation where they connect to the downpipes.
The fitting of this optional product will cancel ECE type approval for the Evolution Line (Titanium) exhaust system and remapping the ECU is mandatory.
This product does not meet emission compliance requirements for street or highway use.
Specifications
- Material: Stainless steel
- Weight: 18.4 kg
- Weight saving vs stock: 5.1 kg (21.7%)
- Installation time: 330 min
Optional: Sound Kit
Akrapovic Sound Kit (Exhaust Valve Remote) for Audi RS 6 Avant / RS 7 Sportback / RS 6 Performance / RS 7 Performance / RS 6 GT (C8) – P-HF1282 (Optional add-on)
The optional Akrapovic Sound Kit enables owners of selected Akrapovic car exhausts to control the sound of the system from the cockpit of their machine. Using Akrapovic technology, drivers can easily switch between the quiet mode and a sportier sound. With the use of a receiver (already included in evolution system) to drive the actuators that open or close the valves at the end of the exhaust system, drivers can use the Sound Remote Controller to regulate the valves.
With the use of the optional Akrapovic Sound Kit, the ECE type approval is no longer valid.
Specifications
- Installation time: 30 min
Fitment
- Audi RS6 Avant (C8) 2018–2026 including OPF/GPF
- Audi RS7 Sportback (C8) 2020–2026 including OPF/GPF
Component Fitment
- Akrapovic Evolution Line (Titanium) for Audi RS 6 Avant / RS 7 Sportback / RS 6 Performance / RS 7 Performance / RS 6 GT (C8) - Non-OPF/GPF – S-AU/T/2H (Required)
- Akrapovic Evolution Line (Titanium) for Audi RS 6 Avant / RS 7 Sportback / RS 6 Performance / RS 7 Performance / RS 6 GT (C8) - OPF/GPF – S-AU/T/1H (Required)
- Akrapovic Link Pipe Set (SS) for Audi RS 6 Avant / RS 7 Sportback / RS 6 Performance / RS 7 Performance / RS 6 GT (C8) - OPF/GPF – L-AU/SS/8/1 (Required: choose one)
- Akrapovic Link Pipe Set (SS) for Audi RS 6 Avant / RS 7 Sportback / RS 6 Performance / RS 7 Performance / RS 6 GT (C8) - Non-OPF/GPF – L-AU/SS/6 (Required: choose one)
- Akrapovic Downpipe and Link Pipe Set (SS, 200 cpsi Cats) for Audi RS 6 Avant / RS 7 Sportback / RS 6 Performance / RS 7 Performance / RS 6 GT (C8) – DP/L-AU/SS/1 (Required: choose one)
- Akrapovic Sound Kit (Exhaust Valve Remote) for Audi RS 6 Avant / RS 7 Sportback / RS 6 Performance / RS 7 Performance / RS 6 GT (C8) – P-HF1282 (Optional add-on)
Build your system: choose your options above and the price covers every part in your selection. Contact us if you need a combination that is not listed.
Part number: S-AU-T-2H-KIT
Please contact us to confirm fitment, options and lead time before ordering.