VelocityAP Performance Exhaust Manifolds/Headers for Aston Martin V8 Vantage - Inconel 625

VelocityAP Performance Exhaust Manifolds/Headers for Aston Martin V8 Vantage - Inconel 625

$11,409.00
Skip to product information
VelocityAP Performance Exhaust Manifolds/Headers for Aston Martin V8 Vantage - Inconel 625

VelocityAP

VelocityAP Performance Exhaust Manifolds/Headers for Aston Martin V8 Vantage - Inconel 625

$11,409.00

Check this part fits your car. Choose your car

Your VIN (recommended)

Optional, but recommended for best fitment. We check your VIN against the part before your order ships.

On backorder · usually dispatched in 2–6 weeks. We'll email you the ETA.

Shipping: Large part · $45 NSW & ACT, $69 VIC, QLD & SA, $129 WA, NT & TAS. Express from $85 · one charge per order, shown at checkout · Shipping details

View store information

VelocityAP Performance Exhaust Manifolds/Headers for Aston Martin V8 Vantage - Inconel 625

Found it cheaper? We'll beat it. See the Crank Price Guarantee. Price in AUD including GST.

Fitment checked on every order. We check your car (and VIN, if you add it) against this part before we order it. If it won't fit, we'll contact you before anything ships. Questions? Ask us

Installation available in NSW and SA through our partner workshops. Book a fitting

Rated 5.0 on Google from 15 reviews. Read our reviews

Genuine, brand-new part, never a replica

VelocityAP offers performance exhaust manifolds and headers constructed entirely from Inconel 625, a material renowned for superior strength and tensile properties at high temperatures and used in Formula 1 exhaust manifolds.

The original Aston Martin manifolds are highly restrictive and manufactured to a cost, sacrificing horsepower and torque. VelocityAP tailored its design to work with the brand's 200-cell sport catalysts and unlock the engine's performance potential.

Some competing products advertise equal-length primaries despite having as much as 85 mm difference in length. VelocityAP manifolds use identical-length primaries for optimum power and torque increases, despite the additional design complexity. Each primary pipe can be measured to verify its length.

In addition to millimetre-perfect primary lengths, VelocityAP manifolds use a fully fabricated merge collector rather than a less costly formed or pressed collector that does not merge the 4 exhaust-gas flows equally and can reduce power. Product photos show the knife-edged internal structure, workmanship and attention to detail incorporated into each set.

The manifolds were independently performance-tested on a Dyno Dynamics rolling road with VelocityAP 200-cell sport catalysts, a performance exhaust system and an ECU tune. Dyno Dynamics systems are known for accuracy and consistency as well as relatively low readings. The customer's vehicle produced a baseline peak figure of 335.5BHP. Following installation of the manifolds, sport catalysts, exhaust system and ECU tune, peak output increased to 378.8BHP-a gain of 43.3BHP or 12.9%.

Because Dyno Dynamics systems are known for low readings, VelocityAP states that these results represent a BHP gain greater than 43.3BHP. The manufacturer's stated output for the 4.3L V8 Vantage is 380BHP. A 12.9% increase over this figure represents a gain of 49BHP and flywheel output of 429BHP.

Torque increased by 35-40ft/lbs from 4000RPM onwards, an improvement of approximately 13-15%. The manufacturer's stated maximum output is 302ft/lbs @5500RPM. VelocityAP estimates the test vehicle's true flywheel torque at approximately 345-350ft/lbs. This is a particularly significant improvement, reducing the need to downshift to access the torque band. VelocityAP states that the tested 4.3L vehicle will now outrun a later 4.7L vehicle.

VelocityAP expects similar results on 2009-on 4.7L vehicles.

Specifications

  • Primary diameter: 40 mm (initial)
  • Secondary diameter: 70 mm
  • Catalyst flange diameter: 76 mm
  • Primary length: 400 mm each, identical

Fitment

  • Aston Martin V8 Vantage, all variants, 2006-2010 model years
  • Aston Martin V8 Vantage, all variants, 2011 model year onwards, when fitted in conjunction with VelocityAP 200 cell sports catalysts

Part number: VEL-AMV8HEADERSINCONEL

Please contact us to confirm fitment, options and lead time before ordering.

You may also like